#7E
Short Cross
- 1-1/4"
- 1-1/2"
from $19.90
In stock
About the #7
The #7 cross lets two continuous pipes pass through each other at 90° in the same plane. Neither pipe is cut, so long runs stay straight and strong.
Like every Nu-Rail® fitting, it's cast from corrosion-resistant 535 aluminum-magnesium alloy and locks onto standard pipe with set screws. No welding, no threading, just a hex key. Loosen the screws and you can reposition it or take the whole structure apart later.
Where it's used
- Mid-rails passing through line posts
- Grids for racks, displays and lighting
- Ladder-style and lattice frames
Sizes & options
Available for 3/4" to 2" IPS pipe. We stock the standard mill finish. Anodized fittings and stainless steel set screws for harsh environments are available on request; call 1-800-METPIPE.
Specifications
- Figure
- #7
- Fits
- 3/4" to 2" IPS pipe
- Casting
- ASTM B26
- Alloy
- ASTM B179 535 Aluminum/Magnesium Alloy
- Finish
- Bright Burnished Mill Finish
- Fastening
- Set screw, hex key (no welding or threading)
- Slip-on
Sizes & pricing
| Item # | Pipe size | SKU | Price | Availability |
|---|---|---|---|---|
| #7-5 | 3/4" | 8755 | $19.61 | In stock |
| #7-6 | 1" | 8781 | $23.28 | In stock |
| #7-7 | 1-1/4" | 8814 | $27.08 | In stock |
| #7-8 | 1-1/2" | 8849 | $33.18 | In stock |
| #7-9 | 2" | 8881 | $40.52 | In stock |
Pick your size in the selector at the top of the page to add it to your cart. Need a quantity we don't show? Call 1-800-METPIPE.
How it goes together
- Slide it on Cut pipe to length and slip the fitting over the end. No threading.
- Position it Slide to height and set the angle before you lock it.
- Tighten the set screw Lock it with a hex key. Loosen it to adjust or take it apart later.
More standard crosses
See all standard crosses
#7E